Syntace C33i Straight 29" SUPERTORQUE Matt | rear wheel
Art. No°:
A10071
€4,999.00*
Available in 60 days, delivery time 1-2 days
Attention: No shipping between 20 May 2024 and 31 May 2024.
Description
The starting signal were the wide Syntace W-Series aluminium rims. Then as now, the unrivalled combination of lightweight and durability. But two decades of experience in the construction of carbon parts Syntace also wanted to transfer to wheels, but without disadvantages in terms of robustness and price. This has now been achieved.
Reinforced Impact Performance (R.I.P.)
The Syntace rim horn reinforcement (patent pending) and a special carbon layup in the rim construction make the Syntace rims even more resistant.
Carbon for condition
Strong carbon rims were a compromise until now. Always expensive and either not particularly strong or, to ensure a minimum level of robustness against punctures, not very light for the money spent. With hairy construction zeal, special tool design and carbon layup, it has finally succeeded to reconcile these opposites better:
On puncture, the Syntace C-Series carbon rim holds out more than all known to us aluminum counterparts and is despite its robustness and 33 mm internal width with only 430 g (27.5 ") really light. To top off these advantages, the new Syntace production process also allows for unrivalled prices.
Wide and light saves real grainr
In the past, narrow rims and heavy, reinforced tires were the norm. Today, however, wide rims can be combined with new, lightweight types of tires. But really wide, high-quality rims were inevitably still a bit heavier than their narrow brothers, otherwise durability suffered. A vicious circle that carbon breaks.
The wider the rim, the more the weight advantages of the black material come into play in the Syntace C-Series rim, combined with a wide and light pellet:
Minimum weight with low rolling resistance on rough surfaces. Additionally, inertia drops dramatically with this tire-rim combination. Why is this important?
Even speed occurs at no time
With just one crank revolution you generate two torque peaks and thus two acceleration pulses. Even at a cadence of 60 rpm, that's 120 small accelerations during one minute. Still without terrain, i.e. without the road shocks that additionally and almost continuously decelerate and accelerate the bike. That is the reason why a reduction of the weight at the outer circumference of the bike wheel gives such a great power saving.
PROCORE and Tubeless-Ready with, for example, the Schwalbe Tubeless rim tape. Due to the new, tubeless-optimized Syntace rim shape is a significantly increased anti-burping protection guaranteed.
Released for the Schwalbe PROCORE dual-chamber tire system, a joint development of Schwalbe and Syntace.
A new heart clicks
Our self-developed hubs are known for years for the installed toothed disc freewheel and the associated low weight.After a long development period, we have succeeded in designing a further development that is optimized for standard straight-pull spokes and at the same time lighter than the previous flange hubs. The installed toothed disc freewheel has Syntace, both in the flange, as well as the Straight Pull hub, again made significantly more robust, despite the now noticeably finer detent gearing with 44 instead of 36 detent points.
The hub body, in already test-optimized dimensioning, made of 7075 T6 aluminum is centered by new, lasered and waterproof Syntace MicroAdjust caps.The new Syntace Duraseal outer seal in double arrangement, as well as double-sided sealed precision deep groove ball bearings with special grease filling guarantee increased corrosion protection and a very long life.
The Boost and EVO6 standard allows with our new Straight Pull hubs in EVO6 centering on both sides adjusted spoke angles and Stei gkeit. Together with our carbon rims this results in maximum weight savings and durability.
technical data:
- Total weight: approx. 1580 g (27.5" ISO 584 28-hole)
- Rim width: 40mm
- Mouth width: 33mm
- Disc mount: 6-hole, center lock
- Hub: Syntace Straight MX
- Free-wheel detent: 44 teeth
- Axle types 148 x 12 mm Boost/EVO6 - Front: 110 x 15 mm Boost
- Spokes: 28 Sapim straightpull spokes
- spoke nipples: Sapim Alu double square, black
- spoking: triple crossed
- rim material: carbon HM
- hub material: 7075 Alu, special heat treatment
- tubeless-ready: e.g.. e.g. with Schwalbe Tubeless- rim tape
- Color: Carbon-Black, black spokes
- Rider weight: max 110 kg
| Product number: | A10071 |
|---|---|
| Brake mount: | 6 - hole |
| Dimension rear: | 148 x 12mm | Boost |
| Freehub: | Sram XD |
| Hub color: | black |
| Nipple color : | black |
| Rim: | Syntace C33i Carbon |